Ubiquiti Networks NanoStation Instrukcja Konfiguracji Pobierz pdf (Strona 1)

Page 1

Beginner’s SETUP GUIDE for NANOSTATION-2 as receiver

and other Ubiquity devices using AirOS rmware V3.6 (Windows/MacOS)

This guide is primarily intended for mobile users (boaters, campers and truckers) who often

change access points. Fixed users can also use it, although there might be other more suitable

congurations for them.

Make sure the Nanostation 2 (Nano for short) is connected to your computer’s network card

with network cables, via the power injector (supplied with 12V either from the included wall-wart or

another 12VDC source). There should then be at least one LED lit on the back of the Nanostation.

On the original Nanostation shipping box, nd and write down the default IP address (we assume:

192.168.1.20), the user name and password (should both be “ubnt”). Do not loose this information!

1) Set your computer to communicate with Nanostation

1a) Windows

1b) Mac OS X

2) Program Nanostation as receiver (station) and router

3) Choose and connect to a WIFI signal

Windows XP

• Open Start/ Control panel/ Network Connections.

• Or in Classic Start menu: Start/ Settings/ Control panel/ Network Connections.

Windows Vista

• Open Start, right-click on Network and then Properties (or Start/Control Panel).

• Double click Network and Sharing Center, click Manage network connections.

Network Connections window will appear:

Windows 7

• Open the Start orb, click on Control Panel,

• Click View Network Status and Tasks, then Change adapter settings:

1 2 3 4 5 6 7 8 9 10

Podsumowanie treści

Strona 1 - Windows 7

Page 1Beginner’s SETUP GUIDE for NANOSTATION-2 as receiver and other Ubiquity devices using AirOS rmware V3.6 (Windows/MacOS) This guide is

Strona 2

Page 10ADDENDUMPossible reasons for not getting online• Cannot associate with AP (access point) - AP fault or intentional restriction - Your signal

Strona 3 - 1b Mac OS X

Page 2Page 3• Enable your network card: right-click on Local Area Connection and select Enable (if it’s already enabled, the option would be “Disable

Strona 4 - GENERAL NOTES

Page 2Page 3Mac OS X 10.4 • Click on the Apple icon then System Peferences: • Click on Network: • Select the Built-in Ethernet: • then click on Co

Strona 5 - Setting up the Nano

Page 4Page 5AC OS X 10.5 (Leopard)• Click on the Apple icon then System Peferences• Click on Network: • Select Ethernet: • Fill in like like this:

Strona 6

Page 4Page 5 Setting up the Nano• Open your browser (e.g. Internet Explorer, Firefox, Opera, etc.) and type in address bar: http://192.168.1.20 (t

Strona 7 - Change Nano mode to Station

Page 6Page 7• You’ll notice that this now appears at the top of the window:• Click on the Advanced tab →Verify items marked by ovals:Change to Adapt

Strona 8

Page 6Page 7• Click on the Link Setup tab →• Click Apply when it appears at the top:Now all the changes will come into effect.• Note: At this point

Strona 9 - Online resources

Page 8Page 9• In the browser address bar type http://192.168.10.20 (the new address of the Nano) then press the Enter key.• Click on the Link setup ta

Strona 10 - ADDENDUM

Page 8Page 9Recommendations• For security, use a rewall (e.g. Windows rewall or free Zone Alarm) and a virus scanner (e.g. Norton or free AVG).• Ma

Komentarze do niniejszej Instrukcji

Brak uwag

Ubiquiti Networks NanoStation Instrukcja Konfiguracji Strona 1

Przeglądaj online lub pobierz Instrukcja Konfiguracji dla Networking Ubiquiti Networks NanoStation. Ubiquiti Networks NanoStation Setup guide [en] Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Ubiquiti Networks NanoStation Instrukcja Konfiguracji Strona 1

Przeglądaj online lub pobierz Instrukcja Konfiguracji dla Networking Ubiquiti Networks NanoStation. Ubiquiti Networks NanoStation Setup guide [en] Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Ubiquiti Networks NanoStation