Ubiquiti Networks LiteStation2 Podręcznik Użytkownika Pobierz pdf (Strona 5)

Bridge IP Address: specify the IP mode:

DHCP – choose to assign the dynamic IP address, Gateway and DNS address by

the local DHCP server.

Static – choose to assign a static IP address.

IP Address: enter IP address of the device.

Netmask: enter a subnet mask of the device.

Gateway IP: enter a Gateway IP address.

Primary DNS IP: enter a DNS IP address.

Click Change button to save the changes.

Step 3 Assign the SSID to subscriber station

Use Link Setup menu to specify the SSID of the wireless device (Access Point) to which

the subscriber station will be associated:

Wireless Mode: specify the Station wireless mode (selected by default).

SSID: specify the SSID of the wireless network device which the

PowerStation2/LiteStation2/LiteStation5 will associate to.

Refer to the section Basic Wireless Settings for detailed configuration information.

Step 4 Specify the IEEE 802.11 mode

Specify the 802.11 wireless network mode by which the subscriber station will

communicate with the wireless device:

IEEE 802.11 Mode: select the IEEE 802.11 mode of your wireless network.

PowerStation2/LiteStation2 supported IEEE 802.11 modes:

B only – connect to a 802.11b only network.

B/G Mixed – connect to a 802.11b/g network (selected by default).

G only – connect to a 802.11g only network.

LiteStation5 supported IEEE 802.11 modes:

A – connect to a 802.11a network (selected by default).

1 2 3 4 5 6 7 8 9 10 ... 25 26

Brak uwag

Ubiquiti Networks LiteStation2 Podręcznik Użytkownika Strona 5