Ubiquiti Networks AF-24 Podręcznik Użytkownika Pobierz pdf (Strona 13)

5. Click the Wireless tab.

6. Enter the Basic Wireless Settings:

a. For one airFiber AF-24, select Master from the Wireless Mode

drop-down. For the other airFiber AF-24, keep the default,

Slave.

b. Enter a name in the Link Name field. This should be the

same on both the Master and the Slave.

c. For the Duplex drop-down:

- Half Duplex The default mode. The TX and RX Frequencies

can be the same or different to suit local interference.

- Full Duplex The TX and RX Frequencies should be different.

d. Select a TX Frequency. This must match the RX Frequency on

your other airFiber AF-24.

e. Select a RX Frequency. This must match the TX Frequency of

your other airFiber AF-24.

f. If needed, change the Output Power, Maximum Modulation

Rate, and/or RX Gain settings.

airFiber Configuration

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Brak uwag

Ubiquiti Networks AF-24 Podręcznik Użytkownika Strona 13